480kw Chillers Trane Chiller Air Cooled Screw Industrial Water Chiller

Continuous innovation and advanced technology enable the company to always be at the forefront of the LG Direct-fired Absorption Chiller, Lithium Bromide Canned Motor Pump, Lithium Bromide Solution 48%-55% and lead the development of the industry. We warmly welcome customers from home and abroad to cooperate with us for common success. Since the beginning, our business philosophy is based on exceptional service, high quality and value. We pride ourselves on exceeding the expectations of our customers, our employees and our partners. We take the international leading company as an example, strive to achieve technology leadership and product stability, and develop ourselves in the service of society. We always regard product quality as the foundation of survival and the way of development, and hope to lead the industry towards the green and low-carbon direction.

Refrigeration flow diagram

Condenser: high-efficiency heat exchange tube to reduce power consumption. Unique tube clamp technology effectively protects the heat exchange tube.

Compressor: high efficiency, two-stage compression, wide cooling capacity adjustment range.

Semi-closed motor: liquid refrigerant cooling, low winding temperature. The operating environment is clean and the reliability is high.

Onboard starter: It is convenient for users to install and save user operation space.

Falling film evaporator: less cooling capacity charge, reducing use cost. High-efficiency heat exchange structure, energy saving is visible.

CH530 control cabinet: self-adaptive control, the unit runs more stable. The feedforward function makes the energy adjustment more sensitive. Support one-time pump frequency conversion, the system is more energy-efficient.

Cooling capacity under standard conditions: the chilled water inlet temperature is 12°C, the chilled water inlet temperature is 32°C, and the cooling water outlet temperature is 37°C.

The standard water chamber is under pressure of 1.0MPa.

Suggested hoisting method

On-site construction

Company Scenario

Storage

If the chiller needs to be stored for more than one month before installation, please do the following preventive work:

Do not tear off the protective bag on the electrical panel;

Store the refrigeration unit in a dry, vibration-free and safe place;

At least every three months, manually measure the pressure in the refrigerant circuit with a pressure gauge.

Venue requirements

Noise considerations

Place the unit in a non-noise sensitive area.

Put the shock absorber under the unit and refer to the shock absorber of the unit.

Install rubber shock absorbers on all water pipelines.

Seal all the gaps in the walls of the computer room.

Foundation

Find a hard, non-flexible mounting pad or a concrete foundation that can bear the total weight of the unit during operation. When the unit is placed, the length and width of the unit should be kept within 6.35mm.

Damping device

Provide rubber shock absorbers for all water pipes of the unit;

Use flexible wire sleeves for electrical connections.

Isolate all pipe hooks to ensure that they are not supported by the main structural beams of the building, so as to prevent vibration from being transmitted to the living and working areas.

Ensure that the pipeline does not add extra pressure to the unit.

Reserved space

Sufficient space must be left around the unit to ensure that installation and maintenance personnel can reach all maintenance parts without restriction.

Sufficient space must be reserved for compressor and condenser maintenance. The recommended value is at least 3 feet to facilitate the maintenance of the compressor and provide enough space to open the control panel door.

We can produce 480kw Chillers Trane Chiller Air Cooled Screw Industrial Water Chiller of international standards and national standards according to customers' requirements. We cracked the problem of restricted safety development at a deep level in terms of consciousness raising and behavior regulation, and created a new situation of enterprise safety work. We advocate that all departments should obey the whole and work together in order to make the enterprise and employees develop and progress continuously.