Midea 800rt R134A Magnetic Series Water Cooled Centrifugal Chiller

Our company has a strong brand awareness, advertising in place, we form our own brand, the added value of Steam Electric Control Valve, TEIKOKU Canned Pump, Hot Water Chiller For Shuangliang is very high. We are always committed to building core competitiveness, always try innovation as life, advocate full innovation, comprehensive innovation, focus on the development of leap and upgrade. Our company's tenet is to be honest and establish our name by faith. High quality service, everything for you. In order to transform potential innovation ability into practical innovation ability, we must have an environment and atmosphere to stimulate potential and form innovation ability. To provide power for development, to create wealth for society, to seek happiness for employees is our fundamental attitude and target positioning of the society and the cause.

Design features of YK centrifugal chiller

Single-stage compressor, advanced and reliable

The York single-stage compressor has fewer moving parts, simple and efficient design, and its long working life has been proven in many applications. The lightweight, high-strength aluminum impeller adopts backward curved blades, which is very efficient. The wing-shaped guide vane reduces the disturbance of the air flow, so that the partial load can maintain high-efficiency performance. The compressor can be unloaded smoothly from 100% to the lowest load.

Open motor, safe and reliable

After the closed motor is burnt, it will cause catastrophic damage to the chiller. The entire unit must be thoroughly cleaned and the refrigerant must be replaced before it can be used. York YK centrifugal chiller adopts air-cooled motor to avoid this danger. The refrigerant does not come into contact with the motor at all, avoiding pollution to other parts of the chiller.

Full use of low-temperature cooling water, significant energy saving

Energy saving requirements under actual load conditions, the unit can make full use of the cooling water as low as 12.8℃, and obtain obvious energy saving effect, unlike some units that need to artificially control the water temperature at 21-24℃.

High-efficiency heat exchanger, excellent performance

The heat exchanger adopts the latest high-efficiency heat exchange copper tube, which makes the heat transfer efficiency best and has a compact structure. The water side and the refrigerant side enhance heat transfer, reducing unit energy consumption and pipe fouling.

Compact fouling, easy to install

The design of the unit is precise and compact, which greatly reduces the footprint of the machine room. Only a few takeovers and wiring are required during installation, which saves installation costs.

Superior part load performance, significantly reducing operating costs

When choosing a chiller, it should be noted that it should not only meet the design requirements of full load, but also operate effectively at lower loads and when the water temperature of the cooling tower is low.

Unit naming

Heat recovery application

Heat recovery can be used in systems that require simultaneous cooling and heating, using part or all of the heat rejection of the vapor compression refrigeration system to improve the energy efficiency of the entire system. Different from the heat pump unit whose main purpose is heating, the heat recovery unit uses the by-product of cooling operation-heat rejection to provide hot water under the premise of satisfying the cooling load. Since the hot water circuit and the cooling water circuit use separate water circuits in most applications, the YK heat recovery unit condenser also uses two separate water circuit designs.

The heat recovery unit turns the wasted heat energy into usable hot water, which is widely used in:

Pre-heating hot water in hotels or hospitals for bathing, swimming, kitchens, etc.;

Comfortable heating;

Reheat the air;

Preheating of boiler make-up water or process hot water.

On-site construction, unit commissioning

We strive to become the most profitable and influential manufacturer of the Midea 800rt R134A Magnetic Series Water Cooled Centrifugal Chiller in the world. According to the different application requirements of customers, we provide accurate and advanced various products and solutions. We have a large number of technical, marketing and management experts with rich experience, and will provide various services for our customers with an international perspective.