Common failures and cause analysis of lithium bromide units
What are the common failures and causes of lithium bromide unit operation
1. Analysis of the reasons for the poor cooling effect:
1. The evaporator or absorber is seriously blocked.
2. The refrigerant water is seriously polluted.
3. Poor vacuum.
4. The solution concentration is low.
5. The circulating water is insufficient or not circulating.
6. Each room of the unit is deformed seriously, and there is a high incidence of cracks and tears.
2. Analysis of the causes of solution crystallization of lithium bromide unit:
1. The vacuum of the unit is poor.
2. The steam supply is too large or the steam fluctuates greatly.
3. The unit lacks solution.
4. The cooling water temperature is too low.
5. The internal operating parameters have been modified by someone.
6. The unit was suddenly cut off and the steam valve was not closed in time.
The above is the common failure and cause analysis of lithium bromide unit, I hope everyone can understand it.
