Ensure safe production in autumn
With the advent of autumn, the temperature gradually decreases, the temperature difference between day and night increases, and the use of fire, electricity, and gas gradually increases, showing the climate characteristics of dry air, short days and long nights. In order to strengthen the safety of fire protection and electricity use in autumn and winter, improve the fire safety awareness of all staff, do a good job in safe production in the fourth quarter, and prevent problems before they happen, Fuller Refrigeration warm tips, please pay attention to the following aspects during work:
1、 Equipment maintenance and leakage prevention shall not be taken lightly
All kinds of flammable and explosive gases, especially acetylene, natural gas and oxygen, shall be prevented from escaping, emitting, dripping and leaking. The joints shall be fastened without looseness, the hoses shall be free of cracks, the acetylene and oxygen tempering devices shall be complete, and the liquid type tempering device at the place where acetylene is supplied centrally shall be filled with appropriate amount of liquid, and the sound of boiling shall be heard with ears; The cutting gun shall be closed in time after use, the joints and valves shall be tested for leakage with soapy water, and any hidden danger shall be reported in time.
2、 Pay attention to ventilation in working environment and refuse open fire
In autumn, the workplace is not well ventilated, and toxic and harmful gases are easy to accumulate in large quantities, which may cause poisoning, fire and explosion accidents. Special attention should be paid to ventilation in key fire prevention areas and flammable and explosive storage areas. Open fire operations are prohibited on site, and supervision and inspection should be strengthened.
3、 Fire and electricity prevention of electrical facilities, pay attention to hidden dangers
In autumn, the climate is dry, and the human body, equipment and facilities are prone to generate static electricity, which may lead to fire, explosion and personal accidents. Attention should be paid to the inspection of equipment and facilities grounding wires, and the prevention and control of static power supply. The generation of static electricity should be minimized, and the release of static electricity should be accelerated to prevent accidents caused by static electricity; The electrical facilities, lines and plugs in the production site and office shall be checked, and the grounding and neutral connection shall be in good condition to prevent potential safety hazards caused by poor insulation, poor connector or missing protective cover (cover), and prevent electric shock caused by touching the plug or holding it wet; Water accumulation and storage of combustible materials are prohibited around electric facilities.
4、 Regularly and timely clean up inflammable sundries
Smoking smoke is strictly prohibited to prevent cigarette butts from being discarded and causing fire. Deciduous leaves and withered grass in the plant area shall be inspected regularly and cleaned in time. Burning in the plant area is prohibited.
5、 Implement daily fire patrol system
Specify the patrol personnel, contents, positions and frequency, focus on the fire, electricity and fire fighting facilities, make patrol records, timely inspect the gas, electricity, fire sources and their surroundings, and timely eliminate fire hazards. Keep the safety exits and evacuation passages unblocked, and keep them unblocked without blocking, occupying or sealing. It is not allowed to stack sundries in the stairwell and evacuation passage;
6、 Special facilities shall be inspected on time and handled in time
The pressure vessel, power distribution room and transformer room shall be patrolled by professionals, and any abnormal situation found shall be handled in a timely manner, and those that cannot be handled on site shall be reported in a timely manner.
7、 Dangerous chemicals shall be specially managed and strictly protected
Paint, thinner, etc. shall be used in strict accordance with the amount of use on duty on that day. If there is any surplus after use, it shall be returned to the warehouse in time to strictly prevent the loss, dispersion and illegal use of hazardous chemicals; In addition to the paint workshop, if other departments need to use paint and thinner, they must apply to the manufacturer and obtain approval from the superior before using them. During the use process, special personnel must be assigned to monitor; Fireworks are prohibited on site, and copper or alloy tools are used when barrel containers are opened; Gas cylinders and thinner buckets shall be handled with care and shall not be dropped, touched, bumped, hit, dragged, dumped or rolled.
8、 Timely equipment maintenance to ensure production safety
Due to large temperature difference in autumn, equipment and metal components are easy to rust, twist and crack, which will directly lead to leakage and explosion accidents. Therefore, pay attention to spot inspection, maintenance and servicing of facilities and equipment; Strengthen equipment troubleshooting, timely report and rectify problems found, and ensure the intrinsic safety of equipment.
9、 Traffic safety inside and outside the plant cannot be ignored
In autumn, the days are short and the nights are long, and all traffic laws and regulations must be strictly observed, especially for employees who work late to ensure that the lighting facilities of vehicles are good; Each department shall regularly organize employees to publicize traffic safety knowledge and remind employees to pay attention to the traffic safety inside and outside the factory. At the same time, all kinds of vehicles go in and out of the plant to sound the horn at a reduced speed, stop and observe when necessary, and pass after ensuring safety; Before starting the forklift, the surrounding environment must be carefully checked, and the horn must be sounded to remind that the speed when entering the production area should not be higher than 5km/h.
10、 Strictly prevent and control the epidemic situation of individuals and enterprises
The project personnel who go out to many places to go back and forth, do a good job of nucleic acid detection, update the health code and travel code, and do a good job of personal protection in strict accordance with the epidemic prevention policy of the destination. After returning, carry out "landing inspection" and "two inspections in three days", and do not gather during this period. All reception departments of infrastructure construction, outsourcing and other external personnel shall register, check double codes, wear masks, protective equipment and external personnel cards in strict accordance with the regulations.
