Knowledge

The importance of understanding the high temperature of chillers The temperature of the high-voltage generator (hereinafter referred to as the high generator) is a very importan

Installation precautions for lithium bromide abs chillers

Introduction to Welding Methods for Pressure Vessels The quality of welding technology for pressure vessels directly affects the reliability of products. Therefore, we need to l

The impact of non condensable gases on lithium bromide chillers The stable operation of lithium bromide units requires extremely high vacuum degree. Once non condensable gases a

Dual effect lithium bromide absorption chiller In a dual effect absorption refrigeration cycle, two generators are set up, high-pressure and low-pressure, and the working fluid

The working principle of ABS chiller         The absorption refrigeration system mainly consists of five equipment, namely a generator, condenser, throttling mechanism, evaporat

Centrifugal chiller unit oil pressure difference alarm During the normal operation of a centrifugal chiller unit, the various operating components of the compressor need to be l

Standardize the pressurization operation of chillers If R134A or R22 is used as the refrigerant for an electric refrigeration unit, its pressure can reach 0.6MPa or 0.8MPa at 20

How to tighten the screws? The sealing surfaces of the cover plates of Sanyo chillers are all flat, without sealing grooves. The gaskets are located on the inside of the bolts.

What are the functions and types of condensers？ The condenser is a heat exchange device in the refrigeration process. Its function is to cool and release the high-temperature an

Lithium bromide solution production Lithium bromide solution, produced industrially by the reaction of lithium carbonate or lithium hydroxide with hydrobromic acid, is an effici

The importance of maintenance during the operation of chillers In a high-temperature environment, the unit is in a high load operating state, and some small faults will graduall