News

The molten crystal tube will not get hot after the unit runs at full load, indicating that the unit returns to normal cloud rotation.

Regarding the difference of their saturation temperature, the so-called saturation state of the solution: it means that the liquid and the vapor...

"Vacuum is the first life of lithium bromide absorption chiller". Lithium bromide absorption chiller is a refrigeration equipment that works under high vacuum.

Absorber lithium bromide droplets may also splash into the evaporator, causing water pollution of refrigerant.

Read out the thermometer and densitometer on the liquid level line at the same time. Be careful to read at the same time.

Under normal operating conditions, evacuate once a week. If air is found leaking into the equipment, it should be emptied in time.

Open the condensate bypass valve of the trap, and slowly add steam to gradually heat up the equipment, and pay attention to the high level of the liquid.

Use auxiliary equipment to provide basic thermal properties (supercooling, internal heat exchange) for COP and operating economy.

The lithium bromide unit generally has a solution filling port near the solution pump and a diaphragm valve switch.

Bromine cooler is mainly composed of copper and iron. Due to the corrosion of the solution, its ions will dissolve into the solution.

The automatic air extraction device is connected with the evaporator and absorber to monitor and maintain the vacuum degree at any time.

Because the solution is corrosive to the two main metal materials of the absorption unit, the service life of the unit is directly affected.